HPE ProLiant Thin Micro TM200, Руководство пользователя

Страница: 50 / 71

Installing the Trusted Platform board
Procedure
1. Prepare the server for hardware installation or removal .
2. If the server is installed in a cradle, wall mount or storage expansion unit:
• Remove the server from the cradle .
• Remove the server from the wall mount .
• Remove the server from the storage expansion unit .
3. Remove the access panel .
4. Remove the thermal sheet .
5. Remove the communication board .
6. Remove the middle frame .
7. Locate the TPM connector on the system board .
8. Install the TPM board.
9. Install the TPM security rivet by pressing the rivet firmly into the system board.
10. Install the middle frame .
11. Install the communication board .
50 Installing the Trusted Platform board