a.
On the left mounting positions, use a drill to bore pilot holes with a diameter of 7.920 mm (0.312 in) and
depth of at least 50.8 mm (2.00 in).
b.
Use a hammer to install the anchors in the pilot holes.
4.
In the stud side mounting positions, use a drill to bore pilot holes with a diameter of 3.175 mm
(0.125 in) and depth of at least 50.8 mm (2.00 in).
Wall anchors are not required on these locations.
5.
Use a small wire brush to clean the right pilot holes.
6.
Install the wall mount screws halfway through into the top mounting positions.
38
Hardware options installation
Содержание ProLiant Thin Micro TM200
Страница 13: ...Component identification 13...
Страница 34: ...1 2 2 34 Operations...
