HPE ProLiant Thin Micro TM200, Руководство пользователя

Страница: 17 / 71

3. Connect all peripheral cabling to the server.
Connecting the power cord and powering on the server
Procedure
1. Connect the power cord:
a. Connect the power adapter to the server.
b. Connect the power cord to the adapter.
c. Connect the power cord to the power source.
1
2
3
2. Secure the power cord and rear panel cables based on the standard cable management practices.
3. Power up the server .
Installing an operating system (OS)
About this task
To operate properly, the server must have a supported operating system. For information on supported
operating systems, contact your authorized HPE representative.
This server supports Class 3 UEFI implementation. UEFI Class 3 implementation only supports UEFI Boot
Mode; there is no support for Legacy BIOS Boot Mode. To prevent errors in installing the operating system,
recognizing boot media, and other boot-related errors, observe the relevant UEFI requirements. For more
information on these requirements, see
Important UEFI Requirements (for HPE ProLiant Thin Micro Servers)
on the Hewlett Packard Enterprise website .
To install an operating system on the server, use one of the following methods.
Connecting the power cord and powering on the server 17