HPE ProLiant SL270s Gen8 Скачать руководство пользователя страница 74

Страница: 74 / 106

Software and configuration utilities 74

Software and configuration utilities

Server mode

The software and configuration utilities presented in this section operate in online mode, offline mode, or

in both modes.

Software or configuration utility

Server mode

HPE iLO (on page

)

Online and Offline

Active Health System (on page

)

Online and Offline

Integrated Management Log (on page

)

Online and Offline

Intelligent Provisioning (on page

)

Offline

HPE Insight Diagnostics (on page

)

Online and Offline

HPE Insight Remote Support software ("

HPE Insight Remote Support

" on page

) Online

HPE Insight Online

Online

Erase Utility (on page

)

Offline

Scripting Toolkit ("

Scripting Toolkit for Windows and Linux

" on page

)

Online

Service Pack for ProLiant (on page

)

Online and Offline

HP Smart Update Manager (on page

)

Online and Offline

HPE ROM-Based Setup Utility (on page

)

Offline

Array Configuration Utility (on page

)

Online and Offline

Option ROM Configuration for Arrays (on page

)

Offline

ROMPaq utility (on page

)

Offline

Hewlett Packard Enterprise product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility,

see the product QuickSpecs on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/qs

HPE iLO Management

HPE iLO Management is a set of embedded management features supporting the complete lifecycle of

the server, from initial deployment through ongoing management.

HPE iLO

The iLO 4 subsystem is a standard component of ProLiant servers that simplifies initial server setup,

server health monitoring, power and thermal optimization, and remote server administration. The iLO 4

subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface.

This design makes iLO 4 independent of the host server and its operating system.
iLO 4 enables and manages the Active Health System (on page

) and also features Agentless

Management. All key internal subsystems are monitored by iLO 4. If enabled, SNMP alerts are sent

directly by iLO 4 regardless of the host operating system or even if no host operating system is installed.

Содержание ProLiant SL270s Gen8











































































































Результаты поиска

Содержание ProLiant SL270s Gen8

Отзывы:

Похожие инструкции для ProLiant SL270s Gen8

Бренды по названию

Популярные бренды

HPE ProLiant SL270s Gen8, Руководство пользователя

Результаты поиска

Содержание ProLiant SL270s Gen8

Отзывы:

Похожие инструкции для ProLiant SL270s Gen8

Бренды по названию

Популярные бренды