HPE ProLiant DX190r Gen10, Руководство по техническому обслуживанию и ремонту

Страница: 57 / 130

To replace the component, reverse the removal procedure.
DIMM-processor compatibility
The installed processor determines the type of DIMM that is supported in the server:
• First-generation Intel Xeon Scalable processors support DDR4-2666 DIMMs.
• Second-generation Intel Xeon Scalable processors support DDR4-2666 DIMMs or DDR4-2933
DIMMs.
Mixing DIMM types is not supported. Install either all DDR4-2666 DIMMs or all DDR4-2933 DIMMs in the
server.
Removing and replacing a DIMM
CAUTION: Before replacing a DIMM, expansion board, or other similar PCA components due to a
perceived hardware error, make sure first that the component is firmly seated in the slot. Do not
bend or flex circuit boards when reseating components.
Procedure
1. Power down the server on page 27.
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis on page 27.
4. Remove the bayonet board on page 28.
5. Remove the secondary riser cage on page 30.
6. Remove the DIMM.
Removal and replacement procedures 57