HPE ProLiant DL580 Gen10, Руководство пользователя

Страница: 102 / 158

CAUTION:
To avoid damaging the connectors, always install the air baffle into the server before installing the
riser cages.
13. Install the fan cage ( Installing the fan cage on page 43).
14. Install the primary PCIe riser cage ( Installing the primary PCIe riser cage on page 38).
15. Install the butterfly PCIe riser cage ( Installing a butterfly PCIe riser cage on page 80).
16. Install the access panel ( Installing the access panel on page 37).
17. Install the server into the rack ( Installing the server into the rack on page 53).
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server on page 32.
Installing a processor mezzanine tray
Install the processor mezzanine tray to support four processors in the server.
Procedure
1. Power down the server on page 32.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack ( Extending the server from the rack on page 32).
• Remove the server from the rack ( Removing the server from the rack on page 33).
4. Remove the access panel ( Removing the access panel on page 36).
CAUTION:
Do not operate the server for long periods with the access panel open or removed. Operating the
server in this manner results in improper airflow and improper cooling that can lead to thermal
damage.
5. Remove the primary PCIe riser cage ( Removing a PCIe riser cage on page 39).
6. If installed, remove the butterfly riser cage ( Removing a PCIe riser cage on page 39).
7. Remove the air baffle ( Removing the air baffle on page 40).
8. Install the processors onto the processor mezzanine tray sockets ( Installing a processor on page 99).
9. Install the DIMMs onto the processor mezzanine tray DIMM slots ( Installing a DIMM on page 105).
10. Install the processor mezzanine tray.
102 Installing a processor mezzanine tray