HPE JH180A, Руководство пользователя, Страница: 8 / 12

8
NOTE:
•
When you install the interface modules on the HPE FlexFabric
5930 4-Slot Switch (JH179A), HPE FlexFabric 5930 4-Slot
TAA Switch (JH188A), and HPE FlexFabric 5940 4-Slot
Switch (JH398A) the 40-GE QSFP+ ports on the interface
modules cannot be split into four 10-GE SFP+ ports.
•
As a best practice, use HPE transceiver modules and cables
for the QSFP+ ports. The available transceiver modules and
cables might change over time. For the most recent list of
available transceiver modules and cables, contact Hewlett
Packard Enterprise Support or marketing staff.
For more information about QSFP+ transceiver modules, QSFP+
cables, and QSFP+ to SFP+ cables, see
HPE Comware-Based
Devices Transceiver Modules User Guide
.
LEDs
Table 10 describes SFP+ port LEDs. Table 11 describes QSFP+ port
LEDs.
Table 10 SFP+ port LED description
LED status Description
Steady green
A transceiver module or cable has been correctly
installed. The port has a link and is operating at 10
Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module or cable has been correctly
installed. The port has a link and is operating at 1
Gbps.
Flashing
yellow The port is sending or receiving data at 2 Gbps or
4 Gbps.
Off
No transceiver module or cable has been installed
or no link is present on the port.