
11
Removing the interface module
CAUTION:
•
Before you remove the interface module, remove the cable
from it to avoid cable damage.
•
If you are not to install a new interface module, install a filler
panel in the slot to prevent dust and ensure good ventilation in
the device.
To remove the interface module:
1.
Prepare an anti-static bag.
2.
Press the latch to release the ejector lever.
3.
Rotate outward the ejector lever, as shown by callout 1 in
Figure
4
.
4.
Pull the interface module slowly out of the interface module slot,
as shown by callout 2 in
Figure 4
.
5.
Place the removed interface module in the anti-static bag.
Figure 4 Removing the interface module
Installing and removing SFP, SFP+, and QSFP+
transceiver modules and cables
For information about installing and removing SFP/SFP+ transceiver
modules and SFP+ cables, see
Pluggable SFP/SFP+/XFP
Transceiver Modules Installation Guide
.
For information about installing and removing QSFP+ transceiver
modules and cables, see
QSFP+ Transceiver Modules/Cables
Installation Guide
.