29
Connecting the power cord
WARNING!
Provide a circuit breaker for each power input. When you connect a power cord, make sure the
circuit breaker is switched off.
Connecting an AC power cord
1.
Insert the female connector of the AC power cord supplied with the power supply into the power
receptacle on the power supply.
2.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
.
3.
Connect the other end of the power cord to an AC power outlet.
Figure 37 Connecting the 300W AC or 650W AC power supply
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power supply
Connecting a DC power cord
CAUTION:
The power cord color code scheme in
is for illustration only. The cable delivered for your
country or region might use a different color scheme. When you connect the power cord, always
identify the polarity symbol on its wires.
To connect a DC power cord:
1.
Unpack the DC power cord, identify the plug for connecting to the power supply, orient the plug
with the power receptacle on the power supply, and insert the plug into the receptacle
(see
).
The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plug
rather than use excessive force to push it in.
2.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
.
