HPE Edgeline EL8000, Руководство по настройке и конфигурации, Страница: 8 / 52

Planning the installation
Safety and regulatory compliance
For safety, environmental, and regulatory information, see Safety and Compliance Information for Server, Storage, Power,
Networking, and Rack Products, available at the HPE website (
http://www.hpe.com/support/Safety-Compliance-
EnterpriseProducts).
Site requirements
Before installing the system, verify that the following site requirements are met:
• Space and airflow requirements
• Temperature requirements
• Power requirements
Hewlett Packard Enterprise recommends that you install or position the system in a location with restricted access, where the
access is secured and controlled. The users/technicians handling the system must be informed about the restrictions applied
and precautions to be taken.
Space and airflow requirement
To allow for servicing and adequate airflow, leave a minimum clearance of 20 cm (7.9 in) around the system.
Power requirement
Installation of this equipment must comply with local and regional electrical regulations governing the installation of
information technology equipment by licensed electricians. This equipment is designed to operate in installations covered by
NFPA 70, 1999 Edition (National Electric Code) and NFPA-75, 1992 (code for Protection of Electronic Computer/Data
Processing Equipment). For electrical power ratings on options, see the product rating label or the user documentation
supplied with that option.
Single power supply workload planning
HPE recommends that you plan your system workloads carefully for systems with single power supply units. Workload
planning is particularly important when running the maximum number of 1U ProLiant e910 Server Blades in a system on a
single power supply. Avoid heavy workloads when running this configuration, or contact HPE to order a second power supply.
Temperature requirements
To ensure continued safe and reliable equipment operation, install or position the system in a well-ventilated, climate-
controlled environment.
Configuration Temperature
Chassis with blades installed Operating temperature of up to 55°C (131°F)
8 Planning the installation