MF877-00 Page 3
Template Revision A
HPE instructions for this template are available at
7.
Remove the remaining three heatsinks
1.
Flip the CPU PCA
2.
Use needle nose pliers to pinch the four heat sink fasteners while removing a heat sink from the CPU PCA
3.
Using a Phillips screwdriver, loosen the four screws holding down the main heat sink
4.
Remove the heat sink and bracket
5.
Repeat the above step for another heat sinks
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
