The machine is programmed to dim the screen after approximately 10 minutes of non-use.
Simply tap or touch the screen to reactivate it. This auto-dimming feature cannot be modified.
To clean the screen use a commercial glass cleaner sprayed on a soft cloth. Do not spray the
touch screen directly.
Avoid prolonged exposure to direct sun light. Excessive exposure to direct sun light can cause
the screen to go dark. This is a normal occurrence with LCD screens, and is not permanent.
The screen has been calibrated during production of the machine. However, if you notice that the
accuracy of your stylus taps have diminished (you do not get the results expected from a
particular key), this indicates the screen requires re-calibration to align the image on the screen
with the touch-sensitive coating. Please refer to the Tools section 5.6 for instructions.
1.7 Light
The Blue SHARK
™
is equipped with a service light to add illumination to the jaw and cutter
area. The light is a white LED affixed to a 6"(15cm) long flexible wire for easy adjustment.
If you choose not to use the light, simply unplug it from the machine.
The light does not have an on/off switch. It will turn off when the machine is turned off,
otherwise it must be unplugged to switch off.
Blue SHARK
™
1 2 3 S H A R K
10
