manualshive.com logo in svg

HP ZBook 15u G4, Руководство по техническому обслуживанию и ремонту, Страница: 125 / 196

Поделиться
Скачать
HP ZBook 15u G4 Скачать руководство пользователя страница 125

●

HP PC Hardware Diagnostics (UEFI) tool to test hard drive, memory and system.

●

Thermal Monitor (available only to authorized service providers/technicians) tool to monitor 
temperature limits of processor and GPU. See “HP Thermal Monitor” in 

6. HP Hardware Diagnostics 

and Tools on page 88

.

5.

Remove or undo recently added hardware (

5. Remove or uninstall recently added hardware, software 

on page 87

). For example, incompatible memory or new solid-state drive storage.

6.

Reseat cables and connections (

10. Reseat cables and connections on page 96

). Pay attention to proper 

installation of memory and hard drive.

7.

Verify that a minimum of at least 100 MB of free space is available on your Windows partition.

8.

If you can start Windows:

a.

Update BIOS and drivers (

4. Update BIOS and drivers on page 87

) to support updates for 

incompatibilities.

b.

Get all the latest updates, using Windows Update.

c.

Undo recent changes:

—

Startup using Last Known Good Configuration.

—

Use System Restore.

—

Roll back device driver in Device Manager.

d.

Check for specific Error Message. See 

Common Blue Screen Error Messages on page 147

.

e.

Boot to safe mode (

11. Test with minimum configuration on page 97

) to troubleshoot issues.

9.

If you cannot start Windows:

a.

Boot to safe mode. (

11. Test with minimum configuration on page 97

)

b.

Use Startup Repair to fix Windows startup files.

c.

Undo recent changes using System Restore to revert to a previous “working” state.

d.

Check for specific STOP error by analyzing Crash Dump (retrieved via a bootable USB). See 

Use 

Windows Debugging Tool on page 148

.

e.

Restore computer using System Recovery or image backup to factory settings.

10.

Lastly, test with essential hardware configuration (

11. Test with minimum configuration on page 97

) 

along with a verified working operating system (i.e., USB Windows-To-Go), if available, to isolate the 
software issue.

Tips & tricks

In some cases, the computer may reboot automatically before you have time to read the blue screen.

To identify the error message itself, disable the automatic restart using one of the following methods:

Right-click on My Computer, and then select Properties > Advanced. Under Startup and Recovery, select 
Settings. Clear the Automatically Restart check box.

Common issues and possible solutions 113

Содержание ZBook 15u G4





































































































































































































Отзывы:

Нет отзывов