manualshive.com logo in svg

HP ZBook 15u G4, Руководство по техническому обслуживанию и ремонту, Страница: 123 / 196

Поделиться
Скачать
HP ZBook 15u G4 Скачать руководство пользователя страница 123

Intermittent shutdown

 

 

Symptoms

●

Shutdown during startup

●

Shutdown during operation

Possible causes

It is often difficult to troubleshoot an intermittent issue. Possible causes include the 
following:

Power-related issue: defective or insufficient power sources, poor connection.

OS Custom Setting: Energy Saver (Power Management).

Thermal-related issue: thermal sensors reach limits.

Hardware related issue: voltage, out-of-range current; electrical short.

 

Troubleshooting steps

1.

Update BIOS and drivers. (

4. Update BIOS and drivers on page 87

)

2.

Perform hard reset (

8. Hard reset on page 95

)

3.

Perform soft reset (

9. Soft reset (Default Settings) on page 96

)

 

Power related issue

1.

Verify functionality of AC adapter alone. If no functionality, test with a verified working 
adapter.

2.

Verify battery alone. Verify that battery is not depleted. Test battery using HP PC 
Hardware Diagnostics (UEFI) tool.

3.

Verify connection of power button, power cable.

 

OS custom settings

1.

Advise users to reset power options and close all applications that are not in use, 
including applications in the background.

2.

Test with a confirmed working operating system to isolate custom settings by users or 
any conflicting applications that cause shutdown.

The sections below are intended for authorized service providers/technicians.

 

Thermal-related issue

1.

Verify thermal condition:

a.

Test fan using HP PC Hardware Diagnostics (UEFI) tool (

6. HP Hardware 

Diagnostics and Tools on page 88

)

b.

Check fan and connection. Reseat fan cable.

c.

Be sure that no obstructions or dust are in heat sink fan, fin, or vent.

d.

Test with a verified working fan.

e.

Remove old thermal compound and pads and replace with new compound and 
pads.

2.

Verify thermal solution:

○

Use Thermal Monitor tool (available only to authorized service providers/
technicians) to perform stress test (processor and GPU) (

6. HP Hardware 

Diagnostics and Tools on page 88

) and verify that thermal sensors are within 

limits after thermal condition is serviced.

 

Hardware related issue

1.

Check for any signs of loose connections, bent pins, stray wires, dust, nearly faulty 
parts (bulging/leaking capacitor).

Common issues and possible solutions 111

Содержание ZBook 15u G4





































































































































































































Отзывы:

Нет отзывов