![background image](http://html.mh-extra.com/html/hp/z8-g4/z8-g4_maintenance-and-service-manual_162658064.webp)
Can not write to the media card.
Cause
Solution
The media card is a read-only memory (ROM) card.
Check the manufacturer’s documentation included with your card to
see if it writable. Refer to the previous section for a list of
compatible cards.
Media card is locked. Locking the media card is a safety feature that
prevents writing to and deleting from an SD/Memory Stick/PRO
card.
If using an SD card, make sure that the lock tab located on the right
of the SD card is not in the locked position. If using a Memory
Stick/PRO card, make sure that the lock tab located on the bottom
of the Memory Stick/PRO card is not in the locked position.
Unable to access data on the media card after inserting it into a slot.
Cause
Solution
The media card is not inserted properly, is inserted in the wrong
slot, or is not supported.
Ensure that the card is inserted properly with the gold contact on
the correct side. The green LED will light if inserted properly.
Do not know how to remove a media card correctly.
Cause
Solution
The computer’s software is used to safely eject the card.
Type
file
in the taskbar search box, and then select File Explorer
from the list of applications. In the left column, expand This PC,
right-click on the corresponding drive icon, and then select Eject.
Pull the card out of the slot.
NOTE:
Never remove the card when the green LED is flashing
After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by the computer.
Cause
Solution
The operating system needs time to recognize the device if
the reader was just installed into the computer and you are turning
the PC on for the first time.
Wait a few seconds so that the operating system can recognize
the reader and the available ports, and then recognize the media
inserted in the reader.
After inserting a media card in the reader, the computer attempts to boot from the media card.
Cause
Solution
The inserted media card has boot capability.
1.
If you do not want to boot from the media card, remove it
during boot or do not select the option to boot from
the inserted media card during the boot process.
2.
During POST (Power On Self-Test), press
F9
to modify
the boot menu.
3.
Change the boot sequence in F10 Computer Setup.
56
Chapter 6 Troubleshooting without diagnostics
Содержание Z8 G4
Страница 1: ...Maintenance and Service Guide HP Z8 G4 Workstation ...
Страница 4: ...iv About This Book ...
Страница 12: ...Left side components Item Component 1 Access panel handle 2 Access panel lock 4 Chapter 1 Product features ...
Страница 118: ...W Windows 10 backup and restore 89 110 Index ...