![background image](http://html.mh-extra.com/html/hp/z8-g4/z8-g4_maintenance-and-service-manual_162658062.webp)
Disk transaction problem.
Cause
Solution
Either the directory structure is bad or there is a problem with a file.
Type
file
in the taskbar search box, and then select File Explorer
from the list of applications. In the left column, expand This PC,
right-click on a drive, select Properties, and then select the Tools
tab. Under Error checking click Check.
Drive not found (identified).
Cause
Solution
Cable could be loose.
Check cable connections.
The system may not have automatically recognized a newly
installed device.
See reconfiguration directions in the
section. If the system still does not
recognize the new device, check to see if the device is listed within
Computer Setup. If it is listed, the probable cause is a driver
problem. If it is not listed, the probable cause is a hardware
problem.
If this is a newly installed drive, run the Computer Setup utility and
try adding a POST delay under Advanced > Boot Options.
The device is attached to a SATA port that has been hidden in
Computer Setup.
Run the Computer Setup utility and ensure Device Available is
selected for the device's SATA port in Advanced > Port Options.
Drive responds slowly immediately after power-up.
Run Computer Setup and increase the POST Delay in Advanced >
Boot Options.
Nonsystem disk/NTLDR missing message.
Cause
Solution
The system is trying to start from the hard drive but the hard drive
may have been damaged.
▲
Perform Drive Protection System (DPS) testing in system
ROM.
System files missing or not properly installed.
1.
Insert bootable media and restart the computer.
2.
Boot to the windows installation media and select
the recovery option. If only a restore kit is available, then
select the File Backup Program option, and then restore
the system.
3.
Install system files for the appropriate operating system.
Hard drive boot has been disabled in Computer Setup.
Run the Computer Setup utility and enable the hard drive entry in
the Advanced > Boot Options list.
Bootable hard drive is not attached as first in a multi-hard drive
configuration.
If attempting to boot from a hard drive, ensure it is attached to
the system board dark blue SATA connector.
Bootable hard drive is not listed first in the Boot Order.
Run the Computer Setup utility and select Advanced > Boot Options
and ensure the bootable hard drive is listed immediately under
the Hard Drive entry.
54
Chapter 6 Troubleshooting without diagnostics
Содержание Z8 G4
Страница 1: ...Maintenance and Service Guide HP Z8 G4 Workstation ...
Страница 4: ...iv About This Book ...
Страница 12: ...Left side components Item Component 1 Access panel handle 2 Access panel lock 4 Chapter 1 Product features ...
Страница 118: ...W Windows 10 backup and restore 89 110 Index ...