HP Z558 Entertainment, Руководство по программному обеспечению

Страница: 202 / 216

192
Microsoft Windows XP Media Center Edition 2005 Reference Guide
Television, Guide, Recording TV
Problem Possible solution
I cannot enter
four-digit channels
into my remote
control
(DISH Network). If you have connected your TV signal source through a set-top box that uses four-
digit channel selection — for example, a DISH Network (EchoStar Satellite
Corporation) DP301 receiver — you may need to change your TV signal settings.
To do this:
Open Media Center and select Settings , TV , and then select Set Up TV signal .
Follow the onscreen instructions until you get to the Choose Number of Digits
screen. Choose
Four digits . Then in the How Do You Change Channels screen, be
sure to select the option Yes, I have to press ENTER or OK . Complete the setup
wizard.
My TV program did
not record and/or
my screen was blank
when I tried to get it
out of standby.
■
Make sure you do not put the HP Digital Entertainment Center into manual
standby mode while Media Center is open. (You manually put the HP Digital
Entertainment Center into standby by pressing the Power icon or Moon icon
on the remote control or by pressing the Moon icon on the keyboard, or by
clicking
Start on the desktop taskbar, then clicking Turn Off Computer ,
then Stand By .)
■
Close Media Center before putting the HP Digital Entertainment Center into
manual standby. This will avoid missed TV recordings and a potential blank
screen when coming out of standby.
■
See “Common recording errors” on page 53 for more information about
recording errors.
The Television Guide
did not automatically
download. Media Center will not automatically connect to the Internet and download the
Television Guide if you are using a dial-up modem. Automatic connection occurs
only with broadband Internet access. You must manually connect to the Internet and
download the Guide. Be sure to disconnect when the download is complete.
I forgot my parental
control password. Open Media Center and select Settings , and then select General . Highlight (do
not open) Parental Controls . Hold down Ctrl and Alt and press Enter on your
keyboard. This will reset the password and allow you to enter a new four-digit code.
I cannot play my
recorded TV
program. If your TV program contains protected content, it may have a time limit on playback.
If so, an expiration message is displayed. If the program has expired, you must
record it again.