manualshive.com logo in svg

HP Z210 Series, Руководство пользователя, Страница: 53 / 68

Поделиться
Скачать
HP Z210 Series Скачать руководство пользователя страница 53

Z210 CMT

Z210 SFF

Drive and cable configuration

HDD bays are numbered 4 through 6 on the chassis. Each
HDD bay contains a mounting sled, allowing tool-less
installation and removal of hard disk drives.

The cables plug into the system board connectors in the
following manner:

●

SATA HDD cables plug into SATA ports starting at SATA
port zero.

●

Blue SATA ports (labeled zero and one) support SATA
Gen 3 (6 Gbit/sec). For best performance, use SATA
Gen 3 data cables to connect primary (SATA Gen 3)
hard disk drives to SATA ports zero and one.

Drive and cable configuration

The HDD bays are not labeled on the chassis.

The cables plug into the system board connectors in the
following manner:

●

SATA HDD cables plug into SATA ports starting at SATA
port zero.

●

Blue SATA ports (labeled zero and one) support SATA
Gen 3 (6 Gbit/sec). For best performance, use SATA
Gen 3 data cables to connect primary (SATA Gen 3)
hard disk drives to SATA ports zero and one.

HDD installation order

HDD installation order

Installing a hard disk drive

This section describes how to install a hard disk drive in the workstation.

Installing an HDD in an HP Z210 CMT Workstation

To install an HDD:

1.

Follow the procedures described in 

Preparing for component installation on page 34

 to prepare

the workstation for component installation.

ENWW

Installing a hard disk drive

45

Содержание Z210 Series





































































Отзывы:

Нет отзывов