HP Workstation x2000, Руководство по началу работы, Страница: 36 / 76

36 Chapter 2
Linux System Setup and Recovery
Configuring Your Linux Workstation
Changing Boot/Network Parameters
Choose the “Boot/Network” tab and the window below appears.
There are three kinds of booting protocols that
setparms
can set up for
you: Static, DHCP, and BOOTP. Choose the appropriate protocol based
on the following descriptions:
1. Static boot protocol
If you choose Static booting, you will have to set several networking
parameters. Some of these are described below.
You will also need to provide an IP address for your workstation, a
hostname, the IP address of the network gateway for your system, the
netmask (255.255.248.0 for example), and a network domain name
(for example, company_name.com).
Press the “DNS Parameters” tab to set up your DNS Configuration.
Refer to the section “DNS Parameters Configuration” in this Chapter
for an example of the screen interface and instructions.
After setting up DNS, click on the “Authorization Parameters” tab
and follow the instructions in the section “Setting Up Network
Authorization Parameters.”
Files that are modified with these network changes are: