HP Workstation x2000, Руководство по началу работы, Страница: 29 / 76

Setting Up and Using Your Linux Workstation
Viewing Your Workstation Configuration
Chapter 1 29
Viewing Your Workstation Configuration
The Summary Screen gives you a summary of the current configuration
of your Workstation (for example: BIOS version, CPU speed, memory
module size, and installed mass storage devices).
You should check the configuration of your Workstation when you first
use it and each time after you install, remove, or upgrade accessories. To
check the configuration:
1. Turn on the display and then the Workstation. If the Workstation is
already turned on, save your data and exit all programs, then restart
the Workstation. Consult your operating system documentation for
any special instructions concerning turning off and restarting your
Workstation.
2. When the start-up logo appears on your display, press
Esc
. This takes
you to the Summary Screen. (To go immediately into the Setup
program, and bypass the Summary Screen, press
F2
instead of
Esc
).
The Summary Screen is displayed for only a short time. Press the
Pause/Break
key on the keyboard to retain the Summary Screen until
another key is pressed.