HP Vectra XM 5/120 Series 3, Руководство пользователя

Страница: 31 / 42

27
3 Troubleshooting and Repair
Power-on System Hardware Tests
Power-on System Hardware Tests
When the PC is switched on or reset, a power-on hardware test is
performed. If an error code appears, press
to view a short
explanation of the meaning of the error.
IRQ Map for
Accessory Boards:
IRQ 9
IRQ 10
IRQ 11
IRQ 15
View available IRQ channels and select
which IRQs are used by installed
accessory boards. Available for PCI/
Used by an ISA
Board
0130, 0241
0280
What you should do:
1 Ensure the configuration stored in CMOS has not been cleared by the
system board jumper (refer to chapter 5).
2 Run SETUP to correct the configuration information.
3 Replace the battery if the configuration is repeatedly lost.
4 If all the above fail to correct the problem, the system board may need
to be replaced. Contact your service representative.
0250
What you should do:
1 Run SETUP and correct the errors highlighted by the SETUP program.
2 Ensure the configuration stored in CMOS has not been cleared by the
system board jumper. Make a written note of the configuration.
3 If the hardware was changed, run SETUP to update the configuration
information.
06xx
What you should do:
1 Ensure that nothing is pushing down on the keyboard, and that no key is
stuck down.
2 If the problem persists, contact your service representative.
61xx, 6500,
6510, 6520
8x06
What you should do:
1 Ensure the memory modules are installed correctly (refer to chapter 3).
2 If this does not fix the problem, initialize the system ROM (refer to “If You
Can’t Start the SETUP Program” in this chapter on page 75).
3 If the problem persists, the system board may need to be replaced.
Contact your service representative.
Field Name Purpose Options Remarks
blac-fam.bk : blacfc03.fb4 Page 27 Monday, July 21, 1997 3:59 PM