HP Vectra VT 6/xxx, Руководство пользователя

Страница: 101 / 168

English 89
4 Troubleshooting Your PC and Using the Setup Program
If Your PC Has a Hardware Problem
If You Cannot Use Any Video Resolution Higher Than 640
✕
480
If you cannot select a video resolution higher than 640
✕
480, you
should clear the contents of the CMOS memory.
To clear the configuration:
1 Switch off the PC and remove the cover (refer to chapter 3 for
instructions).
2 Set the system board switch 1 (CONFG) on the switch block to ON
to clear the configuration from the CMOS memory (refer to page 120
for the switch location).
3 Switch on the PC to erase the CMOS memory.
4 Check that error codes
0240
and
0130
are displayed by the Error
Message Utility, and wait until the PC has started.
5 Switch off the PC.
6 Set the system board switch 1 (CONFG) on the switch block to OFF
to re-enable the configuration.
7 Replace the cover (refer to chapter 3).
8 Switch on the PC and run Setup by pressing when
<Setup=F2>
appears. (Error code
0130
will appear when the PC
starts.)
9 Press to save the configuration and exit from Setup.
margeaux.bk : marg-ue4.fb4 Page 89 Monday, July 21, 1997 4:28 PM