HP Vectra VL6 7, Руководство администратора

Страница: 22 / 112

2 Installing Novell NetWare Drivers
ODI DOS Client Driver
22 English
ODI Driver with DOS Requester
To install the ODI driver for DOS, follow the instructions below:
1 Locate the Novell DOS Requester “NetWare Client for DOS and MS Windows”
diskettes. These could be labeled “WSDOS_1” and “WSWIN_1”. To create these
diskettes from the NetWare CD ROM, follow the NetWare documentation
included with the CD-ROM.
2 Run the NetWare client installation program.
a Insert the number 1 diskette into the drive and run the INSTALL program. For
example, if the NetWare diskette is in drive A, then type:
A:\
INSTALL
b Follow the Novell instructions to fill in the first three fields of the form.
c It is recommended to answer
Yes
when asked if you want to allow the Novell
install program to modify the start-up files. This will make the NetWare client
start up automatically and attach to the server every time the computer is
rebooted. If
No
is entered, the commands to start up the NetWare client will
have to be entered manually.
d If Windows is installed on the computer, it is recommended to answer
Yes
to
allow the Novell install program to add Windows support.
3 When asked to select the driver for your network board, remove the Novell
diskette and insert the LAN Disk. Press
to bring up the Network Board
window.
4 Select
A:\NOVELL\DOSCLNT
then press .
5 The line
HP Ethernet Family Adapter with LAN Remote Power
will be
highlighted. Press to select the driver (PCNTNW.COM).