background image

3  Connecting to a Windows NT Server 3.51

Windows 95 SR2

11

Click on “Other Locations” in the “Update Device Driver Location” dialog 
box, and set path to “A:\” then click “OK.”  (If you have an HP  pre-loaded 
HDD, set the path statement to “C:\LANDRV\3C900\DISK1\”).

12

“3Com EtherLink XL TPO 10Mb Ethernet Adapter” should now be listed, 
click on “Finish”.

13

Insert Disk 2 of 2 of  the 3Com drivers disks and click “OK.”

14

In “Copying Files…” dialog box, set path to “A:\” and click “OK.”  (If you 
have an HP  pre-loaded HDD, set the path statement to 
“C:\LANDRV\3C900\DISK2\”).

15

Click “OK” at the “Network” dialog box, to provide computer / work group 
names.

16

Specify your Computer Name, Workgroup,  and Computer Description, 
but do NOT press enter.  (If you do not have the required information, 
contact your network administrator)

17

Click on the “Configuration” folder in the “Network” Dialog Box.

18

Click on “Add” and  then “Protocol” from “Select Network Component 
Type”, and click on “Add.”

19

Pick  “Microsoft” from “Manufacturers:” then “TCP/IP”, and then click 
“OK”.

20

Highlight the “TCP/IP” network component and click on the “Properties” 
button. 

21

If  you know your TCP/IP settings, enter them now, other wise leave the 
IP address choice checked “Obtain an IP address automatically”, and click 
“OK” . (If you do not have the required information, contact your network 
administrator)

22

Click on “Close” button, and files will copy.

23

When prompted, specify the path to your Windows 95 CD-ROM and click 
on “OK.”  (If you have an HP pre-loaded HDD, set the path to 
“C:\MASTERS\WIN95\SYSTEM\CABS\”)

24

Click on “OK” in the “Please insert the 3Com drivers disk 2” dialog box.

25

Set the path to “A:\” and click on “OK.” (If you have an HP  pre-loaded 
HDD, set the path statement to “C:\LANDRV\3C900\DISK2\”)

26

Click on “Yes” button to finish the Setup installation and restart your 
computer to the “System settings Change” dialog box.

Содержание Vectra VL6 6









































Отзывы: