HP Vectra VL410 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 108

background image

HP Toptools

HP Toptools Deployment Guide Version 5.5

21

Step 16. AutoLogon feature

The AutoLogon feature allows you to supply your password for purposes of allowing the HP Toptools
installation wizard to log you back into Windows NT automatically when there are required software
components installed that force a reboot of the system. This feature is not presented on Windows 2000
systems because reboots are not required.

If you decide not to use the AutoLogon feature, you will be required to supply your password after each
system reboot.

Step 17. Install software

The HP Toptools installation wizard will now install all required/selected software onto the target system.
The HP Toptools installation wizard will reboot the system when necessary and pickup where it left off
until all software is installed.

If a software component fails to install correctly, the HP Toptools installation wizard will present you with
two or three choices. If the failed component was a required component or the HP Toptools device
manager, you are asked to “retry” or “cancel”. If the failed component was any other component, you can
“retry”, “cancel” or “skip”. “retry” will re-run the install of the failed component. (a repeated try of a
component install will sometimes be successful.) “skip” will simply skip over the failed component and
move onto the next component to be installed. “cancel” will exit the HP Toptools installation wizard.

Step 18. The toptools database updates

If the HP Toptools installation wizard was able to connect to the hp website at the beginning of the
installation, then the latest data available will be downloaded and used to populate the toptools
databases. If a connection to the hp website is not available, the data on the installation media will be
used to populate the toptools databases.

Step 19. Check for patches

After all software has been installed, the HP Toptools installation wizard asks to check the HP Toptools
website for any patches or updates that may be available for components installed on the system.

«
...
19
20
21
22
23
...
»

Содержание Vectra VL410













































































































Отзывы:

Нет отзывов

Похожие инструкции для Vectra VL410

FlashMover MS-Direct

Бренд: Microdia Страницы: 5

Бренд: DAQ system Страницы: 21

Бренд: Radio Shack Страницы: 64

Бренд: Canon Страницы: 112

Бренд: IDTECH Страницы: 15

Efector190 O2I Series

Бренд: IFM Electronic Страницы: 33

Бренд: ESD electronic Страницы: 16

Бренд: AuthenTrend Страницы: 17

Бренд: Trust Страницы: 2

Бренд: Pentagram Страницы: 14

Бренд: Z-Com Страницы: 20

Бренд: Star Micronics Страницы: 66

Бренд: S4A Страницы: 2

eGFX Breakaway Box GPU-350W-TB3DEK

Бренд: Sonnet Страницы: 16

AirPremier AG DWL-AG530

Бренд: D-Link Страницы: 48

GTS250 1024MB DEEP GREEN

Бренд: Gainward Страницы: 2

Бренд: Kaba Страницы: 82

Fahrenheit ProVideo 64

Бренд: Orchid Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды