HP Vectra SERIES, Руководство по установке, Страница: 18 / 28

3 Connecting to a Windows NT 3.51 Server
Windows NT Workstation Version 4.0
11 Choose the default Protocol TCP/IP, and any additional network
protocols by clicking the check boxes in the “Network Protocols” dialog
box, and click “Next.” (If you do not have the required information,
contact your network administrator)
12 Click “Next” for the review of network services.
13 Click on “Next” to install the selected components.
14 Insert the Windows NT Workstaion CD.
15 In the “Windows NT Setup” enter the path to your NT files, and click on
the “Continue” button. (If you have an HP preloaded HDD, set path to
“C:\I386”)
16 Click on the “OK” button in the “Madge Smart 16/4 PCI Adapter” dialog
box.
17 Click accordingly if you plan on using DHCP or if you plan on specifying
your IP address manually.
18 Specify your IP information or click on “Obtain an IP address from a DHCP
server” and click “OK.”
19 At the “Show Bindings for” window, click on “Next.”
20 Click on “Next” to start the network.
21 Specify your “Domain/Workgroup Settings”, and click on “Next.” (If you
do not have the required information, contact your network
administrator)
22 Verify that “Networking has been installed on this computer” and click on
“Finish.”
23 To complete the installation, remove the floppy disk, and click on “Yes” to
restart your computer.