7
Figure 7
Screw hole locations and sizes (in mm)
(1) Hook
(2) Mounting hole
(3) Clip
(4) Mounting clip
Figure 8
T-rail holder
(1) T-rail clip
(2) M3 screw nut
(3) M4 screw nut
(4) Clip holder
(5) T-rail holder
(6) Mounting hook
(7) M4 × 5 screw, Length ( 7.6mm / 0.3in ), Wrench
size ( 7mm / 0.28in ), Thread size ( 4mm / 0.16in )
(8) M3 × 8 screw, Length ( 10mm / 0.39in ), Wrench
size ( 5.5mm / 0.22in ), Thread size ( 3 mm / 0.12in )
To mount the AP to a ceiling T-rail:
1.
Loosen the two M3 × 8 screws on each clip holder. Do not remove the screws.
2.
Adjust the T-rail clips to make the T-rail holder wider than the T-rail. See callout 1 in
Figure 9
. Then
lock the T-rail with the T-rail holder according to the arrow indicated in callout 2 in
Figure 9
.
Ø5.0
86.0
136.0
1
2
4
3
