HP V-M200, Инструкция по технике безопасности и нормативным требованиям

Страница: 16 / 28

2-12
Safety and EMC Regulatory Statements
EMC Regulatory Statements
■ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
The FCC requires the user to be notified that any changes or modifications
made to the device that are not expressly approved by the Hewlett-Packard Company may
void the user’s authority to operate the equipment.
This device is restricted to indoor use when using the 5.15-5.25 GHz band (Channels 36,
40, 44 and 48).
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
The availability of some specific channels and/or operational frequency bands are
country/region-dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
For additional FCC Statements, see the Management and Configuration Guide for this
product, available at www.hp.com/networking/support .
Regulatory Model Identification Number
For regulatory identification purposes, this product has been assigned a Regulatory Model
Number (RMN). The RMN for your product is RSVLC-1001. The RMN should not be
confused with the marketing name (HP V-M200 Access Point) or the Product Numbers
(J9467A, J9468A).
Notice for Canada
This device complies with the limits for a Class B digital device and conforms to Industry
Canada standard ICES-003. Products that contain a radio transmitter comply with Industry
Canada standard RSS210 and are labeled with an IC ID.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 d'Industry Canada.
La radio sans fil de ce dispositif est conforme à la certification RSS 210 d'Industry Canada
et est étiquetée avec un numéro d’approbation IC.
Warning: Exposure to Radio Frequency Radiation
The radiated output power of this device is below the FCC radio
exposure limits. Nevertheless, the device should be used in such a
manner that the potential for human contact during normal operation
is minimized. To avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antennas should not
be less than 20 cm (8 inches) during normal operation.
!