background image

Security

Hardware and Software Guide

14–17

6. Use the arrow keys to select the field for the password you 

want to change. Type your current password in the 

Old 

password

 field, and then type the new password in the 

New password

 field and in the 

Verify new password

 field. 

Then press 

f10.

7. To save your preferences, use arrow keys to select 

File > 

Save changes and exit,

 and then follow the instructions on 

the screen.

Your preferences are set when you exit Computer Setup and take 
effect when the tablet PC restarts.

Removing DriveLock Protection

To access the DriveLock settings in Computer Setup:

1. Shut down the tablet PC. If you are not sure whether the 

tablet PC is off or in hibernation, turn the tablet PC on by 
sliding the power button, and then shut down the tablet PC 
through the operating system.

2. Be sure that the hard drive is inserted into the tablet PC 

(not into an optional docking device or external MultiBay).

3. Open Computer Setup by turning on the tablet PC. Press

 f10

 

while the F10 = ROM Based Setup message is displayed in 
the lower-left corner of the screen.

To change the language, press 

f2.

For navigation instructions, press

 f1.

4. Use the arrow keys to select 

Security > DriveLock 

passwords,

 and then press

 enter.

5. Use the arrow keys to select the location of the hard drive, 

and then press 

f10.

6. Toggle the 

Protection

 field to Disable, and then press

 f10.

Содержание TC1100 - Compaq Tablet PC

















































































































































































































































































Отзывы: