Changing from desktop to tower configuration
The computer can be used in a tower orientation with the tower stand included with the computer.
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, and then turn off any external
devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board
as long as the system is plugged into an active AC outlet. You must disconnect the power cord
to avoid damage to the internal components of the computer.
5.
Orient the computer so that its left side is facing down, and place the computer firmly down into
the stand.
6.
Reconnect the external equipment, plug the power cord into a power outlet, and then turn the
computer on.
NOTE:
Ensure that at least 10.2 centimeters (4 inches) of space on all sides of the computer
remain clear and free of obstructions.
7.
Lock any security devices that were disengaged when the computer cover or access panel was
removed.
NOTE:
An optional Quick Release mounting bracket is available from HP for mounting the computer
to a wall, desk, or swing arm. When the mounting bracket is used, do not install the computer with the
I/O ports oriented towards the ground.
10
Chapter 2 Hardware upgrades
