HP T1000, Дополнительное руководство

Страница: 56 / 274

26
Advanced User Interface
Using the Terminal Properties Dialog Box
Invoke this dialog box by pressing the F2 key from the T1000 Connection
Manager.
The Terminal Properties dialog box consists of a total of nine properties sheets
that can be invoked by clicking on their individual tabs. The following five sheets
are used to change terminal properties:
• Network - discussed in “Network Configuration.”
• Upgrade - discussed in “FTP Pull Firmware Upgrades.”
• Security - discussed in “Security Properties.”
• Apps - discussed in “Additional Terminal Applications.”
• Devices - discussed in “Dial-Up Connections.”
These properties sheets are discussed in detail in the following chapters of this
guide. The General, SysInfo, Input, and Display properties sheets are discussed
in “General Terminal Information” and “Display and Keyboard/Mouse Configuration”
in the
Compaq T1000 WBT Users Guide.
Resetting to Factory Defaults
There is one function on the General properties sheet, Reset the Terminal to
Factory Default Property Settings. Use this function to reset the terminal to
factory default settings:
1. Click on the Reset the Terminal to Factory Default Property Settings check
box. Figure 4-2 shows the dialog box that displays.
2. Click on Yes to return to the Terminal Properties dialog box.
3. Click on OK in the Terminal Properties dialog box. (The System Settings
Change dialog box displays. See “Shutting Down the Terminal” in the users
guide for more information about this dialog box).
4. Click on Restart in the System Settings Change dialog box to reset to factory
defaults.