HP T1000, Дополнительное руководство

Страница: 100 / 274

70
Connection Configuration
The following table discusses the functions in this dialog box.
Using the Security Settings Dialog Box
Click on the Security... command button in the second dialog box of the
Dial-Up Configuration Wizard to configure dial-up security. When this command
button is pressed, the Security Settings dialog box displays. Figure 12-2 shows
this dialog box.
Table 12-1 TCP/IP Settings Dialog Box
Function Description
Use Software Compression Click on this check box to enable this
function. By default, this function is
activated and enabled.
Use IP Header Compression Click on this check box to enable Use
IP Header Compression. By default,
this function is activated and enabled.
Use SLIP Click on this check box to enable this
function. SLIP is Serial Line Internet
Protocol. By default, this function is not
enabled.
Use Assigned IP Address Click here to activate this text box. By
default, the text entry box is not
activated.
Use Server-Assigned IP Addresses Click here to disable server-assigned
addresses and to activate the text
entry boxes for typing-in addresses.
By default, the text entry box is not
activated.
Use Default Gateway on Remote
Network Click on this check box to enable this
function. By default, the function is
activated and enabled.