3
O
PERATING
THE
J
UKEBOX
3
37
NEXT
PREVIOUS
JUMP
CONTENTS
INDEX
Table 3-3: Troubleshooting
Problem
What to do
Jukebox won’t power
on
•
Check that the drive activity indicator light on the control
panel is ON (“4” on Figure 3-1) while you see
TESTING
in
the display.
•
If light is not ON, make sure the standby/on switch on the
rear panel is in the ON position and that the jukebox is
plugged in.
•
Is the power cord good?
•
Is the power outlet operating?
•
If steps above are unsuccessful, refer to Appendix A for
service numbers.
Poweron selftest failed
Ensure that shipping screw is removed.
Ensure that the shipping bracket (in the mailslot) is removed.
Power cycle the jukebox.*
If jukebox continues to fail poweron selftest, press
ENTER
and
record the error codes. Call your service representative.
* Before turning power to STANDBY, ensure that the SCSI bus is inactive and will remain
inactive while you are troubleshooting. Going to STANDBY in this jukebox while the SCSI
bus is active can cause data loss and/or SCSI bus problems.
Содержание Surestore 125ex - Optical Jukebox
