b.
Detach and remove the module
(2)
from the display back cover. (The webcam/microphone module
is attached to the display back cover with double-sided adhesive.)
The webcam/microphone module is available using spare part number 792793-001 for models
with a touchscreen.
8.
If it is necessary to replace the display hinges:
a.
Remove the four Phillips PM2.5×3.0 broad head screws
(1)
that secure the display hinges to the
display back cover.
b.
Remove the two Phillips PM2.0×2.5 screws
(2)
on the bottom of the hinges and the two Phillips
PM2.0×2.5 screws
(3)
at the top of the hinges that secure the hinges to the display back cover.
c.
Remove the display hinges
(4)
.
The display hinges are included in the Display Hinge Kit, spare part number 792775-001 for
touchscreen models.
9.
If it is necessary to replace the display panel cable:
a.
Lift the Mylar tape from atop the connector on the panel
(1)
, and then disconnect the cable from
the connector
(2)
.
b.
Disconnect the cable from the webcam module
(3)
.
48
Chapter 5 Removal and replacement procedures forAuthorized Service Provider parts
