b.
Detach and remove the module
(2)
from the display back cover. (The webcam/microphone module
is attached to the display back cover with double-sided adhesive.)
The webcam/microphone module is available using spare part number 793616-001 for models
without a touchscreen.
8.
If it is necessary to replace the display panel:
a.
Remove the four Phillips PM1.5×2.5 screws
(1)
that secure the display panel to the
display back cover.
CAUTION:
Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
b.
Lift the top edge of the display panel
(2)
and swing it up and forward until it rests upside down in
front of the display back cover.
c.
Release the adhesive strip
(1)
that secures the display panel cable connector to the display panel.
d.
Disconnect the display panel cable
(2)
from the display panel.
42
Chapter 5 Removal and replacement procedures forAuthorized Service Provider parts
