Figure 1 Rear view of the HP D2D4312
5. Fibre Channel card
1. Power supplies (two)
6. RAID cards
2. iLO2 Management port (do not use for data)
7. HP SAS expander card
3. LAN ports 3 (required connection) and 4
4. 10–Gb Ethernet card with two ports
Using the ProLiant Guide with HP D2D4106/4112, EH996B/EH998B/EH993C,
models
When using the HP ProLiant DL180se G6 guide, be aware of the following HP D2D-specific
information:
•
The CPU is Intel Xeon X5550 (Spare P/N 490070-001) – there are two per system
•
The HP D2D has 12 removable hard disks. The 12th disk is an online spare disk. If one of
the other disks fails, the online spare disk immediately takes its place. (The HP D2D4106 has
12 x 500 GB hard disks; the HP D2D4112 has 12 x 1 TB hard disks.)
•
The configuration of the system memory is 72 GB (9 x 8 GB DIMMs; 5 for the first processor,
4 for the second). The part number for each 8 GB DIMM is 500662-B21.
•
The HP D2D is supplied with an HP Smart Array P212/Zero Memory Controller (with 512
MB FBWC module) pre-installed in one of the full-height PCI-e slots. For more information
about this card, search on
http://www.hp.com/support/manuals
. Part numbers are as follows:
◦
HP Smart Array P212/Zero Memory Controller: 462828–B21
◦
HP 512 MB Flash Backed Write Cache (FBWC): 534916–B21
•
The system has an HP Dual Channel 8Gb PCIe toFibre Channel Host Bus Adapter, part number
AJ764A, which is installed in a full-height slot
HP D2D and HP ProLiant
7
