HP StoreEver MSL4048, Руководство по началу работы

Страница: 7 / 24

Library user interfaces
The library has two user interfaces:
•
Operator control panel (OCP). From the OCP you can operate the library from the front
panel.
•
Remote management interface (RMI). From the RMI you can monitor and control the library
from a web page. You can access most library functions from the RMI.
Using the OCP
The OCP has a power button, four LEDs, five control keys, and an LCD screen. With the OCP,
you can monitor, configure, and operate most library functions from the library front panel.
For the OCP menu, see “OCP menu” (page 24) .
Control keys
The OCP displays a menu that lets you access information and execute commands using the
five control keys:
Up , Down , Left , Right , and OK .
LED indicators
The OCP has four LEDs that provide information.
Green, steady when power is on, blinking with tape drive or library robotics activity. Ready 1.
Amber when a tape drive cleaning operation is recommended. Clean 2.
Amber if the library has detected a condition that user attention is necessary, but that
the library can still perform most operations. Attention 3.
Amber if an unrecoverable tape drive or library error occurs. A corresponding error
message displays on the LCD screen. User intervention is required; the library is not
capable of performing some operations. Error 4.
Using the RMI
With the RMI, you can monitor, configure, and operate most library functions from a web browser.
Library user interfaces 7