OCP icons
Critical error
—A condition when a
component failure makes the library
inoperable.
Warning
—A condition when a component
failure degrades library activity, but the
library is still operable.
Ready
—The library is online and ready for
operation.
Thumbtack out
—Indicates that the screen
is eligible to be selected for display after a
period of inactivity.
Thumbtack in
—Indicates the screen has
been selected for display after a period of
inactivity. Only one screen at a time can
be thumbtacked.
Item selection
—Indicates that the item can
be selected from a menu list.
Password required
—Denotes that a
password is required to access this feature.
After you install and configure the library, complete the following setup tasks.
Refer to the
HP StorageWorks EML User Guide
for more information.
Change Password
The library ships with a null password.
Passwords must be set to exactly eight
characters consisting of the numbers
0 through 9 and the period character.
Configure Load Ports
This GUI shows the number of installed
load ports and enables you to toggle
between using each as a load port or for
tape slots. Configure it as a Load Port to
move tapes in and out of the library.
Configure as Slots to increase the number
of storage slots in the library. Changing a
load port configuration will cause a library
reboot.
Change Network Settings
This configures the network settings for the
Interface Manager card, which can be set
automatically with DHCP (the default), or
manually with a static IP address. Use the
Address Config: button to toggle between
these two options. If you are setting the
network addresses manually, touch each
address element separately to set the
network configuration.
Configure Barcode Reporting Formats
This defines how bar codes are displayed
on the OCP and sent to the host. Bar code
reporting can be configued as 6 to 8
characters and left or right aligned. If 6
characters with left alignment is chosen,
any characters after the six are truncated.
With 6 characters and right alignment, only
the last six characters are shown with the
beginning characters truncated.
Configure Reserve Slots
Up to nine slots can be reserved for special
purposes, such as cleaning tapes. The
default is none. Select the number you want
to reserve and press Save.
Configure Inventory Mode
This allows you to require bar codes on
tape cartridges, or to make them optional.
Requiring bar codes significantly improves
inventory time.
10
