Powering on the Library
Configuration through the
Operator Control Panel (OCP)
After all componenets have been installed and
cabled, power on the library.
a.
Close and latch the library front door.
b.
Open the back doors of the library rack and
press the main power switch to the
1
(On)
position.
c.
Close the library rack back doors.
The library requires several minutes to power on.
Nothing displays on the operator control panel
(OCP) for the first few minutes of this process.
The OCP is used to configure library settings before first use. After
the library is powered up, configure these settings as described in
the
HP StorageWorks EML User Guide
.
The first screen displayed after library initialization is the Home
screen. After the library status is determined (ready, warning, or
error), that status is displayed on the Home screen, and you can
touch the screen to access other functional and operational screens.
After touching the Home screen, you are
presented with a screen containing a status
bar to the left of an HP logo, two rows of
tabs, and an area for detailed screen
information in the center.
1.
Top-level menu tabs
2.
Status bar
3.
HP Logo
4.
Detailed screen information area
5.
Navigation tabs
8
9
Select anywhere on the screen to continue.
Ready
Ready
Open
Help Back
Page Down
Page Up
Configuration Operation Support
1
4
5
2
3
