HP StorageWorks 1606 - Extension SAN Switch, Справочник по аппаратуре

Страница: 25 / 122

Nonport side of the 1606 Extension SAN Switch
Figure 11 shows the nonport side of the 1606 Extension SAN Switch, which contains the combined
power supplies and fans.
7. Fan assembly 1 1. Fan and power supply assembly #2
8. FRU LED 2. Fan and power supply assembly #1
9. Power supply #1 3. Fan assembly #2
10. Fan assembly #1 4. FRU LED
11. FRU handle 5. Power supply #2
12. FRU handle 6. Fan assembly #2
Figure 11 Nonport side of the 1606 Extension SAN Switch
.
Installing and activating Port Upgrade licenses
1. Use the
portshow
command to verify the number of ports licensed on your switch. The port
status output indicates
Started
and
Licensed
for enabled ports. For more information on this
command, see the Fabric OS Command Reference Manual .
2. Obtain the WWN from the Switch ID pull-out tab located on the port side of your switch.
Alternately, you can use the
switchshow
command to display the WWN.
3. Contact your HP representative to purchase the appropriate Port Upgrade license. HP requires
the switch WWN obtained in
Step 2 to assign a license key.
8-Gb SAN Switch Hardware Reference Guide 25