6.
Verify that the top hook (
1
) and bottom clip (
2
) on the battery pack are securely attached to the
cache module.
15520
1
2
7.
Repeat
step 4
through
step 6
to install the second battery pack on the module.
8.
Install the serviced cache module in the controller as instructed in
Installing the controller cache
module
.
NOTE:
The cache is disabled while the batteries are charging and is automatically re-enabled after the batteries
are fully charged.
Installing the controller cache module
1.
Slide the cache module into the controller (
1
), until the side latches are fully engaged (
2
).
2.
Close the controller cover.
3.
Insert the serviced controller into the chassis as instructed in
Installing the controller
.
newpage pi
1510i Modular Smart Array maintenance and service guide
51