Unpacking
12
HP StorageWorks 700ux/1100ux Optical Jukebox Setup Guide
Removing the packing materials
Remove the 700ux/1100ux jukebox packing materials (see
on page 13).
1. Cut the two plastic bands that secure the jukebox and packing materials to the
pallet.
WARNING:
The plastic bands are under tension and may snap away when
cut. Wear safety goggles when cutting the bands.
2. Open the box. Remove the accessory kit and set aside for later use.
WARNING:
Do not move the jukebox without additional help or an
appropriately rated lift device. The jukebox weights approximately 30 kg
(66 lb).
3. Using at least two people, carefully lift the jukebox from the box, and set
aside.
4. Remove the two end caps from the jukebox.
5. Remove the antistatic bag from around the jukebox.
Note:
Inspect the jukebox for any damage that may have occurred during shipment.
Pay special attention to areas behind any scuffs on the anti-static bag. If damage is
detected, contact your authorized service representative.
6. Store the packing materials for future shipment.
