2.
Detach the power/volume button board
(2)
from the display panel assembly. (The power/volume
button board is attached to the display panel assembly with double-sided adhesive.)
3.
Remove the power/volume button board and cable.
Reverse this procedure to install the power/volume button board.
Rear-facing webcamera
Description
Spare part number
5.0-MP rear-facing webcamera (includes cable)
753193-001
Before removing the rear-facing webcamera, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 12
).
5.
Remove the middle frame (see
Middle frame on page 14
).
Remove the rear-facing webcamera:
1.
Release the zero insertion force (ZIF) connector
(1)
to which the rear-facing webcamera is
attached, and then disconnect the rear-facing webcamera from the system board.
Rear-facing webcamera
17
Содержание Slate7 3G
Страница 4: ...iv Safety warning notice ...
