HP ROM-Based Setup Utility Скачать руководство пользователя страница 108

Страница: 108 / 133

RBSU menu (HP ProLiant G5 and earlier servers or server blades) 108

BIOS Enhanced RAID

The BIOS Enhanced RAID feature is a toggle setting that, when enabled, analyzes the Linux data on

installed hard drives for failure information. Based on the analysis, the system ROM automatically chooses

which hard drive to boot.

Node Interleaving

The Node Interleaving feature requires all nodes to have equal memory sizes when enabled. Enabling

Node Interleaving may affect OS performance.

Serial Number

The Serial Number option allows you to change the serial number. HP recommends that you do not

change this number, unless you are replacing a system board. When the Serial Number option is chosen,
a warning displays:

The serial number should ONLY be modified by qualified service

personnel. This value should always match the serial number located on

the chassis.

Product ID

The Product ID option sets the system product ID, which is found on the product ID sticker on the chassis.

When the Product ID option is chosen, a warning displays:

The Product ID should ONLY be modified by qualified service personnel.

This value should always match the Product ID located on the chassis.

Drive Write Cache

The Drive Write Cache option controls the state of the write cache of the drives attached to the supported
controller. When the Drive Write Cache option is chosen, a warning displays:

Enabling Drive Write Cache may result in data loss or data corruption if

an unexpected power loss occurs.

SATA Software RAID

The SATA Software RAID feature enables RAID functionality (RAID 0 or RAID 1) for the embedded SATA

controller in the system. When the SATA Software RAID option is chosen, a warning displays:

Enabling Software RAID will result in data loss or data corruption on

existing SATA drives. Please backup all drives before enabling this

feature.

Optional PCI-X Riser Fan Monitoring

The Optional PCI-X Riser Fan Monitoring option, disabled by default, enables fan monitoring when an
optional PCI-X expansion cage is installed.

Содержание ROM-Based Setup Utility






































































































































Результаты поиска

Содержание ROM-Based Setup Utility

Отзывы:

Похожие инструкции для ROM-Based Setup Utility

Бренды по названию

Популярные бренды

HP ROM-Based Setup Utility, Руководство пользователя

Результаты поиска

Содержание ROM-Based Setup Utility

Отзывы:

Похожие инструкции для ROM-Based Setup Utility

Бренды по названию

Популярные бренды