HP R3000v, Руководство пользователя

Страница: 13 / 98

INSTALLATION
HP R3000v UPS User Guide S 164201731 Rev 1
7
Tools Required
To assemble the components, the following tools may be needed:
S Medium flat-bladed screwdriver
S Phillips
®
#2 screwdriver
S
7 and 8 mm wrench or socket
Rackmount Setup
C A U T I O N
S The cabinet is heavy (see page 35). A minimum of two people are required to remove the
cabinet from its carton.
S
If installing optional ERM(s), install the ERM(s) directly below the UPS so that all wiring
between the cabinets is installed behind the front bezels and is inaccessible to users.
NOTE:
Mounting rails are required for each individual cabinet.
To install the rail kit:
1.
Attach the left and right rails to the rear rails as shown in Figure 3. Do not tighten the
screws.
Adjust each rail size for the depth of your rack.
Right Rail Left Rail
M4
×
8 Pan-Head
Screws (6 places)
Rear Rails
Figure 3
Attaching the Rails