Removal and Replacement Procedures
4-8
HP UPS R12000 XR Models Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Sierra Part Number: 221273-001 Last Saved On: 8/7/02 3:45 PM
Removing and Replacing the Battery Module
27 kg
60 lb
WARNING: To prevent personal injury, prepare the area and observe all
materials-handling procedures for removing the battery module, which weighs
27 kg (60 lb).
To remove the battery module:
1. Remove the front bezel at the location of the battery module you want to remove. For
more information, refer to the section, “Removing and Replacing a Front Bezel,” in this
chapter.
2. Remove the two screws that secure the battery module in place (1) and slide out the
battery module (2).
2
1
Figure 4-6: Removing the battery module
3. Set aside the used battery module for proper disposal.
4. To replace the battery module, reverse the preceding steps.
Disposing of Used Batteries
The spare battery kit includes the instructions and packaging required to return used batteries
to the appropriate location for disposal.
Do not dispose of used batteries with general office or household waste.
Return the used modules for proper disposal to either:
•
HP, authorized HP Partners, or their agents
•
A recycling center that meets all local environmental standards
