manualshive.com logo in svg

HP ProOne 400, Справочник по аппаратуре, Страница: 36 / 49

Поделиться
Скачать
HP ProOne 400 Скачать руководство пользователя страница 36

Replacing drives

Replacing a hard drive

The 2.5-inch primary hard drive is installed on the right side of the computer. To locate the hard drive on the 

system board, see 

Locating internal components on page 24

.

Removing a hard drive

1.

Remove the screw securing the hard drive to the computer.

2.

Slide the hard drive away the edge of the computer and lift the hard drive out of the computer.

3.

Disconnect the power and data cables from the hard drive. There is a tab you can pull to disconnect 

these cables.

4.

Remove the four mounting screws from the 2.5-inch hard drive cage (1). Be sure to keep the screws to 

use to install a replacement drive. Remove the hard drive (2).

For instructions on installing a hard drive, see 

Installing a 2.5-inch hard drive on page 28

.

Installing a 2.5-inch hard drive

1.

Insert the hard drive into the drive cage (1) and fasten four mounting screws onto the new 2.5-inch hard 

drive (2).

2.

Position the hard drive above the drive cage with the connectors facing the power and data cables.

28

Chapter 3   Hardware repair and upgrade

Содержание ProOne 400


















































Отзывы:

Нет отзывов