HP ProLiant XL230a Gen9 Скачать руководство пользователя страница 65

Страница: 65 / 78

Component identification 65

Item LED

Status

Definition

Do not remove Solid white

Do not remove the drive. Removing the drive causes one or

more of the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green The drive is rebuilding or performing a RAID migration, strip size

migration, capacity expansion, or logical drive extension, or is

erasing.

Flashing

amber/green

The drive is a member of one or more logical drives and predicts

the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

I/O module bay numbering

I/O modules are specific to each server and are installed in the rear of the chassis.
The chassis has ten I/O module bays located in the rear of the chassis.

For more information about product features, specifications, options, configurations, and compatibility,

see the product QuickSpecs on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/qs

Содержание ProLiant XL230a Gen9















































































Результаты поиска

Содержание ProLiant XL230a Gen9

Отзывы:

Бренды по названию

Популярные бренды

HP ProLiant XL230a Gen9, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant XL230a Gen9

Отзывы:

Бренды по названию

Популярные бренды