HP ProLiant XL230a Gen9, Руководство по техническому обслуживанию и ремонту

Страница: 44 / 78

Removal and replacement procedures 44
3.
Align and install the heatsink. Alternate tightening the screws until the heatsink is seated properly.
4.
Install the processor air baffle (" Processor air baffle " on page 34 ).
5.
Install the server (on page 29 ).
Processor
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent possible server overheating, always populate each processor socket
with a processor socket cover and a heatsink blank or a processor and a heatsink.
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty,
the server does not power up.
To remove the component:
1.
Update the system ROM.
Locate and download the latest ROM version from the Hewlett Packard Enterprise website
(
http://www.hpe.com/support
). Follow the instructions on the website to update the system ROM.
2.
Power down the server (on page 26 ).
3.
Disconnect all peripheral cables from the server.
4.
Remove the server (on page 27 ).
5.
Place the server on a flat, level work surface.
6.
Remove the processor air baffle (" Processor air baffle " on page 34 ).
7.
Remove the heatsink (" Heatsink " on page 42 ).