Network Controller
One of the following
depending on Model
Pre-configured Models
One (1) HP Flex-10 10Gb 2-port 530 FlexLOM
Configurable Models
One (1) HP FlexFabric 10Gb 2-port 534FLB FlexibleLOM or HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM
NOTE:
Supported only with server OS and/or in a virtualized environment using hypervisors.
NOTE:
Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 10Gb/1Gb Ethernet.
NOTE:
Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE:
FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre Channel
over Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG Blade Switch with the
CEE license installed, HP Cisco B22HP Fabric Extender and HP Cisco B22HP Fabric Extender with 16 FET for
BladeSystem c-Class. Learn more at:
http://www.hp.com/go/bladesystem/interconnects
NOTE:
FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps.
Expansion Slots
Two (2) I/O expansion mezzanine slots: (occupied and not available with expansion blade)
x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE:
This expansion slot supports NVIDIA Quadro 500M or
1000M.
x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE:
This expansion slot supports NVIDIA Quadro 500M or 1000M or 3000M.
NOTE:
A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
NOTE:
When NVIDIA Quadro 3000M card is ordered for Mezz slot 2, no other cards may be ordered
for Mezz slot 1.
NOTE:
Supports both single and dual Mezz Graphics configuration. Graphics adapter mezzanine -
NVIDIA Quadro 500M(single or dual), 1000M (single or dual), 3000M (single) (single)
.
Two (2) Full-size PCIe expansion slots (available with expansion blade only).
x16 PCIe 2.0 full-size, full-length PCIe card expansion slot
NOTE:
Supported only with qualified select HP PCIe cards listed in this document.
QuickSpecs
HP ProLiant WS460c Gen8 Workstation Blade
Standard Features
DA - 14409 North America — Version 16 — December 13, 2013
Page 7